COMPETITOR CB-610 STANDARD BENCH IMPEX® INC. 14777 Don Julian Rd., City of Industry, CA 91746 Tel: (800) 999-8899 Fax (626) 961-9966 www.imp
STEP 5 (See Diagram 5) A.) Attach the ball end of the Cable (#27) to the Pulley (#28). Place the Pulley in the open slot on the Lat Bar Frame (#31
STEP 6 (See Diagram 6) A.) To store the bench in a vertical position, remove the Lat Bar Frame from the bench and place it onto the storage post on
PARTS LIST KEY NO. DESCRIPTION QUANTITY 1 Right Rear Upright Beam 1 2 M10 x 2 3/8” Hex Bolt 5 3 ∅ ¾” Washer 20 4 M10 Aircraft Nut 1
IMPEX® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX®") warrants this product to be free from defects in workmanship and material, under norm
TABLE OF CONTENTS BEFORE YOU BEGIN... 1 IMPORTANT
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a p
WARNING LABEL REPLACEMENT The Warning Label shown here has been placed on the Cross Brace. If the label is missing or illegible, please call cus
HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler or scale to measure the size. 4
ASSEMBLY INSTRUCTION Tools required assembling the machine: Two Adjustable Wrenches and Allen Wrenches STEP 1 (See Diagram 1) A.) Connect the Rig
STEP 2 (See Diagram 2) A.) Connect the Front Stabilizer (#42) to the Main Seat Support (#52). Secure them with two M10 x ¾” Hex Bolts (#46), four ∅
STEP 3 (See Diagram 3) A.) Slide a ∅ ¾” Washer (#3) onto a M10 x 5 ½” Hex Bolt (#54). Insert the Bolt through the Butterfly (#17). Place a M10 Re
STEP 4 (See Diagram 4) A.) Attach the hole-side of the Backrest Supports (#22) onto both ends of the Pivot on the Main Seat Support (#52). The othe
Comments to this Manuals