Impex MB-2000 Owner's Manual

NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instructi

Step 4 (See Diagram 4) A.) Insert the Left Monkey Bar (#8) into the Right Monkey Bar (#7). B.) Align the holes and secure them together with two M

Step 5 (See Diagram 5) A.) Slide the Sliding Carriage (#13) onto the Left Sliding Track (#9). B.) Insert the Right Sliding Track (#10) into the Left

Step 6 (See Diagram 6) A.) Place the Right & Left Monkey Bars (#7 & #8) onto the Upper Cross Brace (#6). B.) Secure each end with two M12 x 3

12

Parts list KEY NO. DESCRIPTION Q’ty 1 Upright Post-1 1 2 Upright Post-2 1 3 Upright Post-3 1 4 Upright Post-4 1 5 Lower Cross Brace 2 6 U

IMPEX® INC. LIMITED WARRANTY IMPEX INC ("IMPEX®") warrants this product to be free from defects in workmanship and material, under normal

TABLE OF CONTENTS BEFORE YOU BEGIN... 1 IMPORTANT SAFETY NOTICE

WARNING LABEL PLACEMENT The warning label and caution label have been placed on the unit in location shown. If the labels are missing or illegi

IMPORTANT SAFETY NOTICE This play ground equipment is built for optimum safety. However, certain precautions apply whenever you operate a piece of pl

CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS The U.S. Consumer Product Safety Commission (CPSC) estimates that about 100,000 playgr

HARDWARE IDENTIFIER 5

ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and one Allen Wrench. NOTE: It is strongly recommended two or mo

Step 2 (See Diagram 2) A.) Connect Upright Post-2 (#2) and Upright Post-4 (#4) with a Lower Cross Brace (#5) in the mid-span. Secure each end with

Step 3 (See Diagram 3) A.) Insert the Left Balance Beam (#12) into the Right Balance Beam (#11). Align the holes and secure them together with four