Impex SM-3000 Owner's Manual download pdf (Page 9)

STEP 5 (See Diagram 5)

A.) Attach the Backrest Board (#51) to the Rear Vertical Beam (#8). Secure it with two

M8 x 2 ½” Allen Bolts (#52) and ∅ 5/8” Washers (#35).

B.) Attach the Butterfly Support (#43) and the Butterfly Pulley Support (#48) to the Rear

Vertical Beam (#8). Secure them with two M10 x 3” Carriage Bolts (#66), two ∅ ¾”

Washers (#5), and two M10 Aircraft Nuts (#6).

C.) Attach the Right Butterfly (#41) to the Axle on the Butterfly Support (#43). Secure it

with a ∅ 1 ½” Washer (#45) and M12 Aircraft Nut (#46). Repeat the same

procedure to install the other side.

D.) Slide two Butterfly Foam Rolls (#40) onto the Butterfly Arms.

DIAGRAM 5

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

No comments

Impex SM-3000 Owner's Manual Page 9