Impex SM-4000 Owner's Manual Page 1

NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instructi

STEP 4 (See Diagram 4) A.) Attach the Weight Glide Post (#7) to the Weight Glide Base (#8). Secure it with four M10 x 1” Carriage Bolts (#74), Ø ¾”

STEP 5 (See Diagram 5) A.) Attach the Butterfly Base (#12) to the front of Rear Vertical Frame (#6). Attach the Butterfly Pulley Bracket (#13) to th

CABLE LOOP 11

STEP 6 (See Diagram 6 & Cable Loop) A.) Attach the 132” Upper Cable (#41) to the front opening on the Upper Frame (#9). Attach a Pulley (#57) to

STEP 7 (See Diagram 7 & Cable Loop) A.) Attach one end of the 87” Butterfly Cable to the clip on the Right Butterfly (#11). Draw the Cable to

STEP 8 (See Diagram 8 & Cable Loop) A.) Attach the 132” Lower Cable (#40) to the opening on the bottom of the Rear Vertical Beam (#6). Attach

DIAGRAM 8 15

STEP 9 (See Diagram 9) A.) NOTE: Help of another person is strongly recommended for this step. Place the Lifting Sleeve (#27) in between the two Saf

EXPLODED DIAGRAM 17

PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Base Frame 2 51 2 3/8” Square End Cap 2 2 Cross Brace 1 52 2 ¾” x 2” End Cap 1 3 Front Verti

TABLE OF CONTENTS BEFORE YOU BEGIN... 1 IMPORTANT SAFETY NOTI

MULTIPURPOSE BENCH HARDWARE PACK 19

MULTIPURPOSE BENCH ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly re

STEP 2 (See Diagram 2) A.) Attach four Bushings (#27) to a Seat Support Frame (#6). B.) Attach a Backrest Support (#7) to the rear of the Seat Sup

STEP 3 (See Diagram 3) C.) Place the Backrest Board (#14) onto the Backrest Supports (#7). Secure it with four M8 x 2” Allen Bolts (#40) and ∅ 5/

STEP 4 (See Diagram 4) A.) Attach the Leg Developer (#5) to the open bracket on the Main Frame (#1). Secure it with an Axle (#17), two M10 x ¾”

STEP 5 (See Diagram 5) A.) Attach the Arm Curl Pad (#15) to the Arm Curl Stand (#4). Secure it with two M8 x 5/8” Allen Bolts (#41) and two ∅ 5/8”

25

MULTIPURPOSE BENCH PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Frame 1 2 Front Stabilizer 1 3 Rear Stabilizer 1 4 Arm Curl Stand 1 5 Leg Develop

IMPEX INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a

SMITH MACHINE HARDEWARE PACK 3

SMITH MACHINE HARDEWARE PACK 4

SMITH MACHINE ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches NOTE: It is strongly recommend

STEP 2 (See Diagram 2) A.) Attach the right Front Vertical Frame (#3) to the right Base Frame (#1). Secure it with two M10 x 3” Carriage Bolts (#

DIAGRAM2 7

STEP 3 (See Diagram 3) A.) Attach the Rear Vertical Beam (#6) to the top of the Cross Brace (#2). Attach the Weight Glide Base (#8) to the Cross B